Name: Alco-Sensor RBT VXL Full Data System
SKU: 47150
Availability: InStock

Description

Alco-Sensor RBT VXL Full Data System

The Alco-Sensor RBT VXL full data system is a premium breath alcohol testing device from Intoximeters. This device is programmed with both a Quick Test mode and Full Data mode so the operator determines the amount of testing information collected and the speed of each test.

Approved by the U.S. DOT as an evidential breath alcohol testing device
Great for Regulated and Non-Regulated workplace testing programs
Evidential accuracy exceeds +/- .005 at .100 BrAC
Programmed with DOT and NRC testing protocols
Automatic and manual breath sampling capability
Intuitive menus prompt the operator through a DOT testing sequence, greatly reducing operator errors
Automatically initiates a :15 wait period following a positive screening test of .02
Automatically initiates a confirmation test following the :15 wait period
Keyboard allows operator to input testing data such as BAT name and identification number, employee name and identification number, and company name (data is reflected in test print out)
Store hundreds of tests in the device’s memory
The Martel thermal printer prints results without the mess of ink printers
Operates independently of the Martel thermal printer, allowing the operator to test the subject without being tethered to the printer
Operator places the Alco-Sensor VXL into the docking station to quickly print test results. This fail-safe printing method removes any question about the integrity of the printed test result, and removes the issues that sometimes arise with wireless communication technology

This device is programmed with DOT quick test and full data testing modes, so you control the amount of data to collect during the test and the speed of the test.

Quick Test mode collects the following data:

Subject’s name
Subject’s ID number
Reason for the test

Full Data mode collects the following data:

Subject’s name
Subject’s ID number
Company name
BAT name
BAT ID number
Reason for the test

Specs

Alco-Sensor RBT VXL Specifications

Specifications
Sensor type	Electrochemical Oxidation (fuel cell)
Range of measurement	.000 – .400 BrAC
Accuracy and precision	U.S. DOT approved for evidential use
Breath sampling	Automatic with manual override
Response time	5 – 10 seconds negative results, 10 – 30 seconds positive results
Power requirement	Alco-Sensor V: 4 AA batteries (included), 1500+ testsImpact Printer: rechargeable batteries, 75+ tests Slip Printer: 120 volt AC
Test mode	Direct
Calibration	Microprocessor controlled, using gas or wet bath simulator
Memory	1,000 + tests, browse memory, reprint any test
Print capability	Yes, with Thermal or Slip printer
Temperature range	0 – 50 degrees C
Size	14″ X 14″ X 5, 12 lbs (in nylon carrying case)
Warranty	Two year parts and labor

Standard Equipment

RBT VXL Standard Product

Alco-Sensor VXL
Thermal Printer
Keyboard
Docking station and cables
100 mouthpieces
Nylon Carrying Case
Printer paper
Manual
Battery charger
Two year factory warranty
Available bundled with gas tank and regulator

Calibration

RBT VXL Calibration Information

Accuracy Checks and Calibration Adjustments

There are two procedures used to maintain the accuracy of alcohol testing instruments. The operator performs the Accuracy Check procedure to determine if the instrument is reading correctly. If the Accuracy Check procedure determines that the instrument is not reading correctly, the operator performs a Calibration Adjustment procedure. The operator must have acceptable Accuracy Check and Calibration Equipment to perform the Accuracy Check and Calibration Adjustment procedure.

Frequency of Accuracy Checks

In general, Intoximeters recommends performing Accuracy Checks at least once a month. Programs may develop their own policies to perform Accuracy Checks at more frequent intervals.

Frequency of Calibration Adjustments

In general, Intoximeters does not require the operator to perform periodic Calibration Adjustments. Calibration Adjustments are performed only when an Accuracy Check procedure determines that the instrument is not reading correctly. Agencies may develop their own policies that require periodic Calibration Adjustments.

Accuracy Check and Calibration Equipment

The following equipment may be used to perform Accuracy Checks and Calibration Adjustments with the Alco-Sensor VXL.
Alcohol Gas Tank and Regulator
Simulator

Product Library

Alco-Sensor RBT VXL Datasheet

Reviews

Alco-Sensor RBT VXL Full Data System